Products Description
General Information
VNT-MBR- 60E0015SA MBR membrane is manufactured as an equivalent, direct replacement, alternative, retrofit and analogue to Mitsubishi STERAPORETM 6000 Series (PVDF) Element 60E0015SA.
They are suitable for replacement in Mitsubishi STERAPORETM 6000 Series PVDF Module 60M0150FF, 60M0300FF, 60M0450FF, 60M0600FF, 60M0900FF MBR Module.
These hollow fiber MBR membrane modules are developed and manufactured mainly for wastewater and sewage treatment plants. Consisting of a 0.4 micron PVDF ultrafiltration hollow fiber membrane, VNT-MBR- 60E0015SA MBR membrane provide excellent physical barrier to suspended solids, bacteria and other pathogens. The uniform pore size distribution ensures high permeability and sustainable high-quality filtrate.
The new generation of large modules for MBR applications are upgrade-designed and improved, while continuing to leverage the aeration and header design.
These submerged hollow fiber membrane modules are providing economical, comprehensive wastewater and sewage solutions to industrial and municipal applications around the globe.
Membrane Characteristics
Reinforced membrane
Manufacturing process of arraying fibers
Soft resin protection on potting part
Finer pore size
High resistance to fouling
Advantages
Long service life to reduce OPEX
Less sludge accumulation
High quality filtrate
Stable flux with high recovery rate by cleaning
Economical equivalent module for direct replacement of Mitsubishi STERAPORETM 6000 60E0015SA
Applications
Industrial wastewater
Municipal sewage
Domestic sewage
Submerged filtration
Pretreatment of industrial water
Module Dimensions
Model | H (mm/inch) | W (mm/inch) | T (mm/inch) |
VNT-MBR- 60E0015SA | 1,300/51.18 | 1,250/49.21 | 30/1.18 |
Specifications
Model | VNT-MBR- 60E0015SA |
Membrane Surface Areas (m2/ft2) | 15/161 |
Membrane Material | Reinforced PVDF (PET supporting layer) |
Pore Size (μm) | 0.4 |
ID/OD (mm/inch) | 1.0/2.2 (0.04/0.09) |
Flow Direction | Outside-in |
Sealing Material | Polyurethane resin |
Conduit Material | ABS |
Shaft | SUS316L |
Module Weight (kg/lb) | 13/29 |
Operating and Cleaning Limits
Model | TFEM15-60 |
Flux Design (LMH) | 10 - 35* |
Operation Flow (L/H) | 150 - 525 |
Flow Type | Negative Suction Pressure |
Backwash Type | Air Water Backwash |
Max TMP (MPa/psi) | -0.055/-8 |
Operating Temperature (℃/°F) | 5 - 45/41 - 113 |
Operation pH Range | 2 - 11 |
Cleaning pH Range | 1 - 12 |
Max Active Chlorine (ppm) | 1,000 |
* Flux design is normally 10-30 LMH, flux over 30 LMH is mostly applied for the cleaning procedures.
We offer various MBR membrane element equivalents. If you and your customer accept Mitsubishi STERAPORETM 6000 60E0015SA equivalent MBR membrane element, please send us an inquiry now.
