Products Description
General Information
VUF-ZW1500-600 UF membrane is manufactured as the direct equivalent, replacement, alternative, analog, retrofit and analogue to replace Veolia Suez GE ZW1500 V2 600 UF membrane module.
VUF-ZW1500-600 UF membrane is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater, industrial waste water and municipal sewage. These UF modules are made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.VUF-ZW1500-600 UF membrane are applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.
Features
Outside-to-inside flow direction
New generation PVDF hollow fiber
Nominal pore size of 0.02 μm
Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU
Advantages
High tolerance for feed water
High-quality filtrate
Less energy needed with high flux
Longer service life by high fouling resistance and mechanical strength
Direct and economical module replacement
Applications
Surface water
Potable water
Municipal sewage
Industrial wastewater
Reclaimed water reuse
Pre-treatment of sea water desalination
Module Dimensions
| Model | L | L1 | D | D1 | Feed & filtrate port | Concentrate port | Joint type |
VUF-ZW1500-600
| 1,919/75.55 | 216/8.5 | 219/8.62 | 180/7.09 | DN50 | DN40 | UPVC unions |
* Formerly TFZW7055C.
Specifications
Effective membrane area | 55.7 m²(600 ft²) |
Membrane material | PVDF(Polyvinylidene Fluoride) |
Pore size | 0.02 μm |
Fiber ID/OD | 0.65/1.2 mm(0.03/0.05 inch) |
Flow direction | Outside-in |
Housing material | UPVC |
Potting material | Epoxy resin |
Wet weight filled with water | 32 KG(70.5 lbs) |
Shipping weight | 37 KG(80 lbs) |
Operating and Cleaning Limits
Type of operation | Dead-end flow or cross flow |
Design flux(25°C) | 40-120 L/m2·h(24-71 gfd) |
Temperature | 1-40°C(34-104°F) |
Maximum feed pressure(20°C) | 4 bar(58 psi) |
Maximum trans-membrane pressure | 2.8 bar(40.6 psi) |
Backwash flux(25°C) | 32-120 L/m2·h(19.2-71 gfd) |
Maximum backwash pressure | 2.5 bar(36 psi) |
Maximum air scour feed pressure | 1.5 bar(21.8 psi) |
Air scour flow | 4-8.5 Nm3/hr(2.4-5 scfm) |
pH-Continuous operation @25°C | 2-11 |
pH-Cleaning @25°C | 2-12 |
Maximum NaClO | 1,000 mg/L |
Maximum feed TSS | 100 ppm |
Maximum feed turbidity | 300 NTU |
Maximum feed particle size | 300 µm |
Filtrate SDI15 | ≤2.5 |
Filtrate turbidity | ≤0.1 NTU |
