Products Description
General Information
VUF-SFP-2880XP UF membrane is manufactured as the equivalent, replacement, alternative, retrofit and analogue to DuPont DOW IntegraFlux SFP-2880XP (SFP2880XP) UF module.VUF-SFP-2880XP UF membrane are pressurized modules, which are designed and manufactured for the filtration of surface water, potable water, seawater, industrial wastewater and municipal sewage. These UF modules are made of upgraded new generation PVDF hollow fibers with extra permeability.These series UF modules are applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.
Features
Outside-to-inside flow direction
New generation PVDF hollow fiber
Nominal pore size of 0.03 μm
Typical filtrate quality SDI≤2.5, turbidity≤0.1 NTU
Advantages
High tolerance for feed water
High-quality filtrate
Less energy needed by extra high permeability
Longer service life by high fouling resistance and mechanical strength
Economical equivalent module for direct replacement of DuPont DOW IntegraFlux SFP-2880XP
Applications
Surface water
Potable water
Municipal sewage
Beverage clarification
Industrial wastewater
Reclaimed water reuse
Pre-treatment of sea water desalination
Module Dimensions
| Model | Application | L | L1 | D | H | Connector |
VUF-SFP-2880XP | Industrial | 2360±3 mm (92.9±0.1 inch) | 2130±3 mm (83.9±0.1 inch) | 225 mm (8.9 inch) | 180 mm (7.1 inch) | DN50 |
Specifications
Specifications | Parameters |
Model | VUF-SFP-2880XP UF membrane |
Effective membrane area | 77 m²(829 ft²) |
Volume | 39 L(10.3 gallon) |
Dry weight | 61 KG(100 lbs) |
Wet weight filled with water | 135 KG(220 lbs) |
Membrane material | PVDF(Polyvinylidene Fluoride) |
Fiber ID/OD | 0.7/1.3 mm(0.02/0.05 inch) |
Flow direction | Outside-in |
Pore size | 0.03 μm |
Housing material | UPVC |
Clamp material | Stainless Steel |
Potting material | Epoxy resin/Polyurethane |
Operating and Cleaning Limits
Type of operation | Dead-end flow or cross flow |
Design flux(25°C) | 40-120 L/m2·h(24-71 gfd) |
Temperature | 1-40°C(34-104°F) |
Maximum feed pressure(20°C) | 6.25 bar(90.6 psi) |
Maximum feed pressure(40°C) | 4.75 bar(68.8 psi) |
Maximum trans-membrane pressure | 2.1 bar(30.5 psi) |
Backwash flux(25°C) | 80-120 L/m2·h(48-71 gfd) |
Maximum backwash pressure | 2.5 bar(36 psi) |
Maximum air scour feed pressure | 2.5 bar(36 psi) |
Maximum air scour flow | 4-12 Nm3/hr(2.4-7.1 scfm) |
pH-Continuous operation @25°C | 2-11 |
Maximum NaClO | 2,000 mg/L |
Maximum feed TSS | 100 ppm |
Maximum feed turbidity | 300 NTU |
Maximum feed particle size | 300 µm |
Filtrate SDI15 | ≤2.5 |
Filtrate turbidity | ≤0.1 NTU |
We offer various UF membrane module equivalents. If you and your customer accept DuPont DOW IntegraFlux SFP-2880XP equivalent ultrafiltration module, please send us an inquiry now.
